Yanmar SA324

Double tap to zoom

 

Features

Increased horsepower for increased versatility

  • Lift more, dig more, cut faster
  • Full-frame chassis for less vibration and noise
  • Precise control of rear attachments
  • 24 horsepower

 

Unrivaled versatility

Lift more. Dig deeper. Cut faster. You’ll be able to use a wide range of attachments to get the most out of what your property has to offer. SA Series tractors provide the flexibility to handle any job around your property. Here’s a quick look at the SA324 features:

  • Hydrostatic transmission with dual pedals for simplified operation
  • Power steering for less operator fatigue
  • Power takeoff (PTO) and three-point hitch for attachments
  • 24 horsepower

 

Built together to work together

SA Series tractors pack the power you’d expect from much larger tractors. That means the SA324 can do serious work with a front-end loader, a hydraulic backhoe and three-point hitch attachments for mowing, tilling, planting, digging, plowing and so much more.

Yanmar designs and builds the major components – engine, front axle, transmission and final drive – to work together. We also smoothly integrate these features and optional attachments so you can get more work done quickly:

  • Yanmar-designed front-end loader, with class-leading lift capacity of 1,200 pounds and quick-attach for buckets, forks and other attachments
  • 60-inch, mid-mount, drive-over mower
  • Dual hydraulic pumps • Smooth hydraulic power steering
  • One touch-on/off, electro-hydraulic, independent rear PTO

Specifications

Powertrain

Battery 540 CCA
Bore and Stroke in. (mm) 3.15x3.30 in. (80x84 mm)
Cooling system Water cooled
Fuel Diesel
Gross Power 23.4 HP (17.8 kW)*
Maker Yanmar
Maximum Torque ft.lbs. (Nm) 45.7 ft.lbs (62.0 Nm)
Model 3TNV80F
Number of cylinders 3
PTO Power at Zero Speed 21.7 HP (16.2 kW)
Rated RPM 3,200 RPM
Total displacement 77.2 cu. In. (1.266 L)
Type 24 Engine Horsepower* Diesel Tractor

 

Capacities

Engine Coolant 3.0 qt. (2.8 L)
Engine Oil 3.6 qt. (3.4 L)
Front Axle Oil 0.92 gal. (3.5 L)
Fuel tank 6.1 gal. (23.0 L)
Transmission Oil 4.1 gal. (15.5 L)

 

Drivetrain

2WD/4WD engagement Selectable
Brakes Wet disc
Transmission type Hydrostatic, 2 Range Speeds

 

Hydraulics

3-point hitch Limited Category 1
3-point lift capacity at 24” (61 cm) 1,209 lbf. (548 kgf)
4-way loader control valve Standard
Hydraulic Control System Position Control, Open Center
Power steering Fully Hydraulic
Pump capacity (implement) @ Rated 3.7 GPM (14.1 L/min)
Pump capacity (steering) @ Rated RPM 4.3 GPM (16.1 L/min)
System Pressure psi (MPa) 2,439 psi (16.7 MPa)

 

Dimensions

Ground Clearance (with R4 Tires) 8.5” (215 mm)
Minimum Turning Radius ft. (m) 8.5 ft. (2.6 m)
Overall Height (with Folded ROPS, R4 Tires) 70.4" (1,789 mm)
Overall height (with R4 Tires) 85.8” (2,180 mm)
Overall Height (with R4 Tires, Top Of Steering Wheel) 55.3" (1,405 mm)
Overall length (with 3PH and R4 Tires) 105.8” (2,688 mm)
Weight (with ROPS, R4 Tires, Full Fluid) 1,715 lbs. (778 kg)
Wheelbase 63.0” (1,600 mm)
Width (with R4 Tires) 54.6” (1,387 mm)

 

Tire size

Industrial (R4) - Front 23 x 8.50-12 4PR
Industrial (R4) - Rear 12-16.5 10PR
Turf (R3) - Front 23 x 8.50-12 4PR
Turf (R3) - Rear 33 x12.5-16.5 4PR

 

Traveling speeds

Forward (with R1 Tires) mph (kmh) Low: 0-5.9 (0-9.4), High: 0-12.3 (0-19.6)
Reverse (with R1 Tires) mph (kmh) Low: 0-4.1 (0-6.6), High: 0-8.5 (0-13.7)

 

PTO

Mid Shaft SAE16/32, 15 Splines
Mid Speed/Engine RPM 2,057/3,200
Mid Type Independent
Power Take Off (PTO) Power HP (kW) 18.1 HP (13.5 kW)
Rear Shaft Size 35 mm OD, 6 Splines
Rear Speed/Engine RPM 554/3,200
Rear Type Independent
Type Hydraulic Clutch