Landmark Equipment, Texas


  • Locations
Dallas-Irving
1351 S. Loop 12
Irving, TX 75060

Directions
McKinney
3774 N. Central Expy
McKinney, TX 75071

Directions
Fort Worth
1309 Haltom Road
Fort Worth, TX 76117

Directions
Waxahachie
2200 W. Hwy 287 Business
Waxahachie, TX 75167

Directions
Cleburne, TX
2449 Weatherford Hwy
Cleburne, TX 76033

Directions

Sany SW405K

New Equipment / Sany / Construction Equipment / WHEEL LOADERS / SW405K

Sany SW405K for sale at Landmark Equipment, Texas

Double tap to zoom

Sany SW405K for sale at Landmark Equipment, Texas

 

Features

  • The 228-net horsepower with almost 40,000 lbs of breakout force and bucket capacity of 4 cubic yards
  • Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.
  • Keep more material in the bucket with the SANY boom suspension
  • Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes and Kawasaki pumps

Specifications

ENGINE  
Engine Model Deutz TCD7.8
Max Gross Power 262 HP
Net Engine Power 228 HP
Max Gross Torque 965 ft lbs
Displacement 476 in3
OPERATING  
Bucket Capacity 4.0yd3
Breakout Force 40,466 lbs
Tipping Load Straight 31,967 lbs
Tipping Load @ Full Term 28,881 lbs
Clearance (full lift 45º dump) 10' 2"
Reach (full lift 45º dump) 3'11"
WEIGHT  
Operating Weight 40,786 lbs
HYDRAULIC SYSTEM  
Max Flow 81 GPM
Max Pressure 4,061 PSI
HYDRAULIC CYCLE TIMES  
Raise 5.4 sec
Dump 1.9 sec
Float Down 3.3 sec
Total Cycle Time 10.6 sec
SERVICE CAPABILITIES  
Fuel Tank 85 gal
Cooling Systems 5.25 gal
Engine Crankcase 6 gal
Transmission 4.7 gal
Front Axle 5 gal
Rear Axle 5 gal
Hydraulic Tank 31 gal
DEF Tank 10.5 gal
TRANSMISSION  
Shift Modes Automatic, Manual, Kick-Down
Forward Gear 1-4 4-25 mph
Reverse Gear 1-4 4-16 mph
POWER TRAIN  
Front Axle Fixed
Traction Aid Manual Differential Lock
Rear Axle Oscillating
Traction Aid Open Differential
Service Brakes Wet Disk
Parking Brake Disk Brake
OVERALL DIMENSIONS  
Height to Axle Centerline 430 mm 1'5"
Height to Top of Cab 3,580 mm  11' 9"
Center Line of Rear Axle to Edge of Counterweight 2,335 mm  7' 8"
Wheelbase 3,200 mm  10' 6"
Center Line of Front Axle to Center Pivot 1,600 mm  5' 3"
Shipping Length without Attachments 7,040 mm  23' 1"
Shipping Length with Bucket 8,180 mm  26' 10"
Max. Dump Height 5,415 mm  17' 9"
Hinge Pin Height at Max. Lift 4,145 mm  13' 7"
Dump Clearance at Max. Lift 3,090 mm  10' 2"
Dig Depth, Level Bucket 30 mm  1.2"
Reach at Max. Lift and 45º Discharge 1,185 mm  3' 11"
Roll Back at Max. Lift 58º
Dump Angle at Max. Lift and Dump 45º
Roll Back at Carry Height 50º
Roll Back at Ground 45º
Tail Angle to the Rear Wheel 27º
Clearance Circle to Outside of Tires 5,635 mm  18.6"
Clearance Circle to Counterweight 5,911 mm  19' 5"
Max. Circle 6,465 mm  21' 3"
Width 2,200 mm  7' 3"
Articulation Angle +/- 40º

OUR LOCATIONS

Get A Quote