New Holland Boomer 35

Double tap to zoom

New Holland Boomer 35 for sale at Landmark Equipment, Texas

 

Features

Whether you use your tractor to maintain a few acres or you depend on it to make a living, Boomer™ compact tractors will deliver. In all, there are four models ranging from 28–47 hp to choose from. As a rule of thumb, the more work you do in a typical week, the greater the horsepower you’ll want. 

Specifications

Model

Boomer 35
Brakes  

Service brakes

Dual-pedal mechanically actuated wet disc

Parking brake

Engage hand-lever, foot-assist service brake
Dimensions / Weight  

Approx shipping length, in (mm) (w/ R4 tires)

119 (3017)

Approx shipping width, in (mm) (w/ R4 tires)

64 (1618)

Approx shipping hieght, in (mm) (w/ R4 tires)

91 (2291)

Approx shipping weight, lbs (kg) (w/ R4 tires)

2913 (1321)
Electrical  

Battery capacity (Amp hours / cold cranking amps)

80/660

Lighting

2 - hi/lo beam halogen headlights, 2 - halogen front-corner work lights, 2 - tail / brake lights, 2 - hazard / turn signals

Instrumentation

Analog tachometer, fuel gauge, coolant temperature, hour meter.

Alternator

12 volt, 50 amp
Engine  

Type

4-cylinder, diesel

Number of cylinders / Aspiration

4 / Natural

Displacement, cu. in. (L)

108 (1.76)

Gross engine power, hp (kW)

38 (28)

PTO horsepower, hp (kW) - Gear

32.2 (24.0)

PTO horsepower, hp (kW) - HST

30.3 (22.6)

Rated speed (rpm)

2700

Fuel type

Standard diesel fuels or B2 Biodiesel (meeting ASTM 6751 standards)

Air filter

Dual element, dry type with cleanable outer element and replaceable inner safety element

Lubrication

Full flow, pressure feed lubrication with spin-on filter cartridge

Emissionization standard

Tier III

Fuel tank capacity, gal (L)

8.7 (33)

Exhaust Type

Under hood

Foot Throttle

Standard

Cold Start Aid

Glow Plug
Front Axle  

FWD Axle

Standard

Front differential lock

Limited slip

FWD clutch engagement

Mechanical lever
Hydraulics  

System type

Open center, fixed displacement gear pump

Implement pump capacity, gpm (lpm)

8.2 (31.2)

Steering & services system, gpm (lpm)

Hydrostatic power steering w/dedicated gear pump, 4.1 (15.6)

Total maximum tractor flow, gpm (lpm)

12.3 (46.8)

Remote valves

Optional; max of 2 open center, rear mounted, 3 position, self centering.

Loader control valve

Optional
Operator Area / General  

Seat

Fore / Aft / Weight adjustable with spring suspension

Operator Floor

Sound dampening, anti-slip rubber mat

Steering column

Tilting

Cup holder / Tray

Standard

Hood design

One piece, flip-up hood on gas strut

ROPS

Foldable
PTO  

Rear PTO

Electro-hydraulic engaged, Independent 540-RPM, w/ flip-up PTO shield

Mid PTO

Optional - Independent 2000RPM
Rear 3-Point Hitch  

Category

Category I

Position control

One lever - Mechanical

Drop rate control

Standard

Draft control

Optional - Top Link sensing

Drawbar

2-position swinging / extendable

OECD lift capacity @ ball ends, lbs (kg)

1,807 (820)
Rear Axle  

Rear differential lock

Mechanical foot pedal engagement
Transmission  

Traction clutch - Gear transmission

Dry, 9.4-inch (240 mm) diameter organic plate

Type - Gear

12Fx12R with 4 syncronized gears, 3 constant mesh ranges and synchronized dash-mounted shuttle

Type - HST

3 Range, dual-pedal (Fwd/Rev) hydrostatic transmission

Cruise Control

Standard on HST