Takeuchi TL8

Takeuchi TL8 for sale at Landmark Equipment, Texas

Double tap to zoom

Takeuchi TL8 for sale at Landmark Equipment, Texas

 

Features

ENGINE

  • ENGINE
  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • DOC+DPF Exhaust After Treatment
  • Active Power Control Power Management System
  • Working Modes - Power and ECO
  • Automatic Fuel Bleed System
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
  • Dual Element Air Filter, with Pre-Cleaner

 

ELECTRICAL

  • Multi-Informational Display
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • Halogen Work Lights, Front and Rear
  • Engine Preheat
  • Hour Meter
  • Back-up Alarm
  • Horn

 

UNDERCARRIAGE AND FRAME

  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Front and Rear Tie-Down and Lift Points
  • 2 Speed Travel
  • 15.7" Rubber Track with Integrated Steel Cables and Forged Steel Inserts
  • 12.6" Rubber Track with Integrated Steel Cables and Forged Steel Inserts (optional)

 

OPERATOR'S STATION

  • Tilt-up Operator's Station
  • Deluxe High Back Adjustable Suspension Seat
  • Rear Pivoting Seat Bar with Integrated Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2" Seat Belt
  • Retractable 3" Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper (optional)
  • AM/FM/MP3 Radio with NOAA Weatherband (optional)
  • Polycarbonate Door (High Flow Only)

 

HYDRAULIC & WORKING EQUIPMENT

  • Cushioned Boom Cylinders
  • Boom Float with Detent
  • Hydraulic Pilot Controls
  • Proportional Auxiliary Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • Hydraulic Self Leveling
  • Mechanical Quick Coupler
  • Hydraulic Quick Coupler - Cab - Standard Equipment
  • Hydraulic Quick Coupler - Canopy - optional
  • Primary Flow Auxiliary Hydraulics 18.4 gpm
  • High Flow Auxiliary Hydraulics 33 gpm (optional Cab Only)
  • Pattern Change Valve (ISO or H) (optional)
  • d

Specifications

OPERATING PERFORMANCE  
Operating Weight - Canopy 8,455 lb    (3,835 kg)
Operating Weight - Cab 8,631 lb   (3,915 kg)
Tipping Load 6,020 lb   (2,731 kg)
Rated Operating Capacity, SAE J818* 2,105 lb   (955 kg)
ROC w/ Optional Counter Weight 2,323 lb   (1,054 kg)
Operating Load at 50% of Tipping Load 3,010 lb   (1,365 kg)
Bucket Breakout Force 6,856 lb  (3,110 kg)
Lift Arm Breakout Force 6,709 lb   (3,100 kg)
Traction Force 9,127 lb   (4,140 kg)
Ground Pressure - 15.7" Track 4.4 psi   (30.2 kPa)
Ground Pressure - 12.6" Track 5.4 psi   (37.2 kPa)
Travel Speed - Low 4.6 mph   (7.4 km/hr)
Travel Speed - High 6.8 mph   (11.0 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 18.4 gpm   (69.5 Lpm)
Auxiliary Flow - High Flow (optional) 33.0 gpm   (124.9 Lpm)
Hydraulic System Pressure 3,046 psi   (21.0 MPa)
ENGINE  
Make / Model Kubota / V3307-CR-Turbo
Engine Displacement 203 cu in   (3.3 L)
Horsepower @ 2,600 rpm 74.3 hp   (55.4 kW)
Maximum Torque @ 1,500 rpm 192 ft-lb   (260 Nm)
FLUID CAPACITIES  
Engine Lubrication 11.2 qt   (11.8 L)
Cooling System 14.8 qt   (14.0 L)
Fuel Tank Capacity 19.8 gal  (75.0 L)
Fuel Consumption (65% of Full Load) 2.69 gal/hr  (10.2 L /hr)
Hydraulic Reservoir Capacity 10.36 gal   (39.0 L)
Hydraulic System Capacity 15.3 gal  (58.0 L)