The TL12 delivers an excellent blend of power and performance. It is ideal for operating high performance hydraulically powered attachments in the most demanding applications.
ENGINE
ELECTRICAL
UNDERCARRIAGE and FRAME
OPERATOR'S STATION
HYDRAULIC
WORKING EQUIPMENT
OPERATING PERFORMANCE | |
Operating Weight - Canopy | 11,620 lb |
Operating Weight - Cab | 11,850 lb |
Tipping Load | 8,102 lb |
ROC (SAE J818 stabdard 35% tipping load*) | 2,833 lb |
Operating Load at 50% of Tipping Load | 4,051 lb |
ROC w/ Optional Counterweight | 3,263 lb |
Bucket Breakout Force | 8,660 lb |
Lift Arm Breakout Force | 8,550 lb |
Traction Force | 13,760 lb |
Bucket Capacity (SAE Heaped) | 24 cu ft |
Cycle time | |
Raise-Full Load | 4.6 |
Lower-No Load | 3 |
Dump-Full Load | 3.2 |
Curl-No Load | 2.3 |
*Operating capacity of track loaders to be rated according to SAE J818 at no more than 35% of the tipping load | |
ENGINE | |
Make / Model | Kubota / V3800CRTI |
Tier Rating | EPA Interim Tier 4 |
Cylinders / Displacement | 4/230 cu in (3.8 L) |
Horsepower | 109.9 hp (82.0 kW) |
Rated / Max Engine Speed | 2,400 rpm / 2,600irpm |
Maximum Torque | 277 ft-lb (375 Nm) |
Engine Lubrication | 13.9 qt (13.2 L) |
Cooling System | 17.4 qt (16.5 L) |
Fuel Tank Capacity | 28.5 gal (108.0 L) |
Fuel Consumption (65% of full load) | 3.7 gal/hr (14.0 L/hr) |
Electrical System | 12 volts / 80 amps |
UNDERCARRIAGE | |
Traction Drive Type | Hydrostatic drive with double reduction planetary final drive |
Parking Brake | Spring applied, hydraulically released |
Track Roller Type | Permanently sealed rollers with precision metal face seals |
Track Rollers | 6 per side |
Track Width | 17.7 in (450 mm) |
Track Ground Contact Length | 62.8 in (1,595 mm) |
Ground Pressure - Canopy | 4.6 psi (32.0 kPa) |
Ground Pressure - Cab | 4.7 psi (32.7 kPa) |
Travel Speed - Low Range | 4.9 mph (7.9 km/hr) |
Travel Speed - High Range | 7.4 mph (11.9 km/hr) |
HYDRAULIC SYSTEM | |
Hydraulic Reservoir Capacity | 15.9 gal (60 L) |
Hydraulic System Capacity | 25.1 gal (95 L) |
Auxiliary Hydraulic Flow | 23 gal/min (88 L/min) |
Auxiliary Hydraulic Flow - Optional High Flow | 40 gal/min (153 L/min) |
Auxiliary Hydraulic Flow - Optional 2nd Circuit | 17 gal/min (64.5 L/min) |
Hydraulic System Pressure (psi) | 3,046 psi (21 MPa) |
DIMENSIONS | |
Front Clearance Radius without Bucket | 5 ft 1.4 in (1,560mm) |
Rear Clearance Radius | 5 ft 9.1 in (1,755 mm) |
Angle of Departure | 30 degrees |
Maximum Lift Height to Bucket Pin | 10 ft 6.2 in (3,205 mm) |
Dump Height Fully Raised | 7 ft 11.7 in (2,430 mm) |
Maximum Dump Angle Fully Raised | 38.7 degrees |
Maximum Bucket Rollback at Ground Level | 31 degrees |
Reach Fully Raised | 3 ft 2.8 in (985 mm) |
Overall Width Without Bucket | 6 ft 1.2 in (1,860 mm) |
Recommended Bucket Width | 80 in (2,032 mm) |
Overall Height | 7 ft 7.3 in (2,320 mm) |
Overall Length (without bucket) | 10 ft 3.4 in (3,135 mm) |
Minimum Ground Clearance | 13.5 in (344 mm) |