Takeuchi TL10V2

Takeuchi TL10V2 for sale at Landmark Equipment, Texas

Double tap to zoom

Takeuchi TL10V2 for sale at Landmark Equipment, Texas

 

Features

ENGINE

  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • High Pressure Common Rail Injection System
  • DOC+DPF Exhaust After Treatment
  • Automatic Fuel Bleed System
  • Active Power Control Power Management System
  • Working Modes - Standard and ECO
  • Dual Element Air Filter
  • Dial and Foot Throttle
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame

 

ELECTRICAL

  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • LED Work Lights: Two Front and Two Rear
  • Engine Preheat
  • Hour Meter
  • Back-up Alarm
  • Horn

 

UNDERCARRIAGE AND FRAME

  • Double Reduction Planetary Drives
  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Two Speed Travel
  • 15.7" Rubber Track
  • Grease Type Track Adjuster
  • Front and Rear Tie-Down Points and Lift Points
  • Rear Bumper Integrated into Frame

 

OPERATOR'S STATION

  • 5.7" Color Multi-Informational Display with Rear Camera
  • Tilt-up Operator's Station
  • Deluxe High Back Suspension Seat
  • Rear Pivoting Lap Bar with Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2" Seat Belt
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)
  • Retractable 3" Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Polycarbonate Door and Level 2 Guard (High Flow Only)

 

HYDRAULIC & WORKING EQUIPMENT

  • Vertical Lift Design
  • Pilot Hydraulic Controls
  • Boom Float with Detent
  • Cushioned Boom Cylinders
  • Hydraulic Self Leveling
  • Proportional Auxiliary Hydraulic Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • High Capacity Steel Hydraulic Tank
  • Mechanical Quick Coupler
  • Hydraulic Quick Coupler Cab - Standard Equipment
  • Hydraulic Quick Coupler Canopy - optional
  • Primary Flow Auxiliary Hydraulics 18.8 gpm
  • High Flow Auxiliary Hydraulics 32.8 gpm (optional)
  • Secondary Auxiliary Hydraulics 18.8 gpm (optional)
  • Ride Control (optional)
  • Pattern Change Valve (ISO or H) (optional)

Specifications

OPERATING PERFORMANCE  
Operating Weight - Canopy 9,950 lb   (4,515 kg)
Operating Weight - Cab 10,270 lb   (4,660 kg)
Tipping Load 7,205 lb   (3,268 kg)
Rated Operating Capacity (ISO 14397-1)@35%* 2,522 lb   (1,144 kg)
Operating Load at 50% of Tipping Load 3,600 lb   (1,633 kg)
Bucket Breakout Force 6,520 lb   (2,957 kg)
Lift Arm Breakout Force 5,400 lb   (2,450 kg)
Traction Force 9,730 lb   (4,413 kg)
Ground Pressure - Canopy 4.9 psi   (34.3 kPa)
Ground Pressure - Cab 5.1 psi   (35.4 kPa)
Travel Speed - Low 4.8 mph  (7.7 km/hr)
Travel Speed - High 7.0 mph   (11.3 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 18.8 gpm  (71.2 Lpm)
Auxiliary Flow - High Flow (optional) 32.8 gpm  (124.0 Lpm)
Hydraulic System Pressure 3,481 psi   (21.0 MPa)
ENGINE  
Make / Model Kubota / V3307CR-TE4B
Engine Displacement 203 cu in   (3.3 L)
Horsepower @ 2,600 rpm 74.3 hp   (55.4 kW)
Maximum Torque @ 1,500 rpm 195 ft-lb   (265.0 Nm)
FLUID CAPACITIES  
Engine Lubrication 11.8 qt   (11.2 L)
Cooling System 15.9 qt   (15.0 L)
Fuel Tank Capacity 21.5 gal   (81.0 L)
Fuel Consumption (65% of Full Load) 2.7 gal/hr   (10.3 L /hr)
Hydraulic Reservoir Capacity 9.5 gal    (36.0 L)
Hydraulic System Capacity 17.2 gal    (65.0 L)
MACHINE DIMENSIONS  
Max. Lift Height to Bucket Pin 10 ft 4.8 in   (3,169 mm)
Dump Height Fully Raised 7 ft 11.9 in   (2,435 mm)
Dump Reach Fully Raised 3 ft 1.4 in   (950 mm)
Dump Angle 40°
Rollback Angle 30°
Track Ground Contact Length 4 ft 7.9 in   (1,419 mm)
Machine Length 9 ft 7.2 in   (2,925 mm)
Transport Length 12 ft 1.0 in   (3,680 mm)
Transport Height 7 ft 5.4 in   (2,270 mm)
Departure Angle 30°
Clearance Circle with Bucket 7 ft 8.5 in   (2,350 mm)
Clearance Circle without Bucket 5 ft 0 in   (1,535 mm)
Clearance Circle Rear 5 ft 5.2 in   (1,655 mm)
Track Width 15.7 in   (400 mm)
Ground Clearance 12.6 in   (320 mm)
Overall Width without Bucket 5 ft 8.5 in   (1,740 mm)