Sany SW405K

Sany SW405K for sale at Landmark Equipment, Texas

Double tap to zoom

Sany SW405K for sale at Landmark Equipment, Texas




  • The 252-net horsepower with almost 40,000 lbs. of breakout force and bucket capacity of 4 cubic yards
  • Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.
  • Keep more material in the bucket with the SANY boom suspension
  • Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes and Kawasaki pumps


Engine Model Deutz TCD7.8
Max Gross Power 262 HP
Net Engine Power 252 HP
Max Gross Torque 962 ft lbs
Displacement 7.8 L
Bucket Capacity 4.2yd3
Breakout Force 39,683 lbs
Tipping Load Straight 31,967 lbs
Tipping Load @ Full Term 28,881 lbs
Clearance (full lift 45º dump) 10' 2"
Reach (full lift 45º dump) 3'10"
Operating Weight 40,786 lbs
Max Flow 81 GPM
Max Pressure 3916 PSI
Raise 5.4 sec
Dump 1.9 sec
Float Down 3.3 sec
Total Cycle Time 10.6 sec
Fuel Tank 85 gal
Cooling Systems 5.25 gal
Engine Crankcase 6 gal
Transmission 4.7 gal
Front Axle 5 gal
Rear Axle 5 gal
Hydraulic Tank 31 gal
DEF Tank 10.5 gal
Shift Modes Automatic, Manual, Kick-Down
Forward Gear 1-4 4-25 mph
Reverse Gear 1-4 4-16 mph
Front Axle Fixed
Traction Aid Manual Differential Lock
Rear Axle Oscillating
Traction Aid Open Differential
Service Brakes Wet Disk
Parking Brake Disk Brake
Height to Axle Centerline 440 mm17"
Height to Top of Cab 3527 mm139"
Center Line of Rear Axle to Edge of Counterweight 2330 mm92"
Wheelbase 3200 mm10' 6"
Center Line of Front Axle to Center Pivot 1600 mm63"
Shipping Length without Attachments 6862 mm22' 6"
Shipping Length with Bucket 8142 mm26' 8"
Max. Dump Height 5441 mm17' 10"
Hinge Pin Height at Max. Lift 4133 mm13' 6"
Dump Clearance at Max. Lift 3118 mm10' 3"
Dig Depth, Level Bucket 56 mm2.2"
Reach at Max. Lift and 45º Discharge 1140 mm45"
Roll Back at Max. Lift 58º
Dump Angle at Max. Lift and Dump 45º
Roll Back at Carry Height 51º
Roll Back at Ground 45º
Tail Angle to the Rear Wheel 27º
Clearance Circle to Outside of Tires 5800 mm19'
Clearance Circle to Counterweight 5911 mm19' 5"
Max. Circle 6456 mm21' 2"
Width of the Bucket 3000 mm9' 10"
Width 2200 mm87"
Articulation Angle +/- 40º