Sany SLB95

Sany SLB95 for sale at Landmark Equipment, Texas

Double tap to zoom

Sany SLB95 for sale at Landmark Equipment, Texas

 

Features

  • 4WD Powershift Transmission with Limited Slip Differential and Drive Shaft Guard
  • Flip-Over Pads, Outrigger Cylinder Guards and Front Bumpers
  • Load Sensing Hydraulic with Pilot Controls and ISO/SAE Pattern Change
  • Eight LED Working Lights, Rotating Beacon, Traffic Lights, Air Suspension Seats, and 3″ Retractable Seatbelt
  • Boom Float, Return to Dig, and Breaker Line
  • Optional: Cab with Climate Control and Bluetooth Radio
  • ROPS/FOPS Certified (ISO-3471, ISO-27850, ISO-3449)

Specifications

TECHNICAL SPECIFICATIONS  
Operating Weight 17,637 lbs   8 000 kg
Engine Deutz TCD3.6-L4 - Low Maintenance T4F
Displacement 220 in³3.6 L
Gross Power 99 hp @ 2200 rpm   73.8 kW @ 2200 rpm
Net Power 95 hp @ 2200 rpm    70.8 kW @ 2200 rpm
Maximum Torque 302.4 lbs-ft @1600 rpm   410 Nm @ 1600 rpm
Transmissions ZF 4WD — 4 Speed Forward/Reverse
Speed Gear 1 3 mph  4.8 km/hr
Speed Gear 2 6 mph   9.6 km/hr
Speed Gear 3 12 mph  19.3 km/hr
Speed Gear 4 22 mph  35.4 km/hr
Hydraulics Load Sensing with Pilot Controls
Main Hydraulic Pump Kawasaki Variable Displacement—Axial Piston
Hydraulic Power 52.3 hp @ 2200 rpm  39 kW @ 2,200 rpm
System Flow 41.2 gal/min  156 l/min
Operating Pressure 3,625 psi   24.9 MPa
One-way Aux Line Max Flow 21 gal/min  79.4 l/min
One-way Aux Line Max Pressure 2,103 psi   14.5 MPa
DIMENSIONS  
Overall Length, Transport 24' 3"   7 381 mm
Overall Width, Transport 7' 6"    2 280 mm
Transport Height 12' 3"   3 732 mm
Cab Roof Height 10' 3"   3 129 mm
Ground Clearance 1' 1"     320 mm
Length from Axle to Axle 7' 4"    2 245 mm
Wheel Base, Rear 5' 10"  1 780 mm
Turning Radius, Front Tires 13' 11"  4 240 mm
Turning Radius, Front Bucket 15' 9"    4 800 mm
Stabilizer Overall Width 11' 5"    3 491 mm
SERVICE REFILL CAPACITIES  
Fuel Tank Capacity 140.0 L    37.0 gal
DEF Tank Capacity 10.0 L     2.6 gal
Hydraulic Oil Capacity 120.0 L    31.7 gal
Engine Oil Capacity 8.5 L      2.2 gal
Cooling System Capacity 20.0 L    5.3 gal
Gear Box Oil Capacity 18.0 L    4.8 gal
WORKING RANGE  
Maximum Digging Height 17' 7"    5 370 mm
Maximum Reach from Center of Swing Pivot 18' 7"    5 671 mm
Maximum Digging Depth 14' 3"    4 332 mm
Maximum Height to Bucket Hinge Pin 11' 5"    3 478 mm
Dump Clearance 8' 10"    2 700 mm
Reach at Dump Position 2' 5"     730 mm
Maximum Digging Depth with Bucket Leveled 3"     88 mm
Bucket Rollback Angle @ Ground Level 40º
Bucket Rollback Angle @ Full Height 51º
Loader Dump Angle @ Full Height 44º
Maximum Operating Height 14' 1"    4 293 mm
DIGGING PERFORMANCE  
Bucket Breakout Force—Excavator 12,354 lbf   55 kN
Bucket Breakout Force—Loader 11,240 lbf   50 kN