Landmark Equipment, Texas


  • Locations
Dallas-Irving
1351 S. Loop 12
Irving, TX 75060

Directions
McKinney
3774 N. Central Expy
McKinney, TX 75071

Directions
Fort Worth
1309 Haltom Road
Fort Worth, TX 76117

Directions
Waxahachie
2200 W. Hwy 287 Business
Waxahachie, TX 75167

Directions
Cleburne, TX
2449 Weatherford Hwy
Cleburne, TX 76033

Directions

Sany SLB95

New Equipment / Sany / Construction Equipment / BACKHOE LOADER / SLB95

Sany SLB95 for sale at Landmark Equipment, Texas

Double tap to zoom

Sany SLB95 for sale at Landmark Equipment, Texas

 

Features

  • 4WD Powershift Transmission with Limited Slip Differential and Drive Shaft Guard
  • Flip-Over Pads, Outrigger Cylinder Guards and Front Bumpers
  • Load Sensing Hydraulic with Pilot Controls and ISO/SAE Pattern Change
  • Eight LED Working Lights, Rotating Beacon, Traffic Lights, Air Suspension Seats, and 3″ Retractable Seatbelt
  • Boom Float, Return to Dig, and Breaker Line
  • Optional: Cab with Climate Control and Bluetooth Radio
  • ROPS/FOPS Certified (ISO-3471, ISO-27850, ISO-3449)

Specifications

Technical Specifications  
Operating Weight (Cab + Attachments) 8,040 kg  17,725 lbs
Operating Weight (Canopy + Attachments) 7,880 kg  17,372 lbs
Operating Weight (Cab, no attachments) 7,540 kg  16,623 lbs
Operating Weight (Canopy, no attachments) 7,360 kg  16,226 lbs
Engine Deutz TCD3.6-L4 - Low Maintenance T4F
Displacement 3.6 L  220 in³
Gross Power 73.8 kW @ 2,200 rpm  99 hp @ 2,200 rpm
Net Power 70.8 kW @ 2,200 rpm  95 hp @ 2,200 rpm
Maximum Torque 410 Nm @ 1,600 rpm  302.4 lbs-ft @ 1,600 rpm
Transmission ZF 4WD — 4 Speed Forward/Reverse
Speed Gear 1 4.8 km/hr  3 mph
Speed Gear 2 9.6 km/hr  6 mph
Speed Gear 3 19.3 km/hr  12 mph
Speed Gear 4 35.4 km/hr  22 mph
Hydraulics Load Sensing with Pilot Controls
Main Hydraulic Pump Kawasaki Variable Displacement—Axial Piston
Hydraulic Power 39 kW @ 2,200 rpm  52.3 hp @ 2,200 rpm
System Flow 156 l/min  41.2 gal/min
Operating Pressure 24.9 MPa  3,625 psi
One-way Aux Line Max Flow 79.4 l/min  21 gal/min
One-way Aux Line Max Pressure 14.5 MPa  2,103 psi
Dimensions  
Transport Length 7,381 mm  24' 3"
Transport Width 2,280 mm  7' 6"
Transport Height 3,732 mm  12' 3"
Cab Height 3,129 mm  10' 3"
Ground Clearance (minimum) 320 mm  1' 1"
Length from Axle to Axle 2,245 mm  7' 4"
Wheel Base, Rear 1,780 mm  5' 10"
Turning Radius, Front Tires 4,240 mm  13' 11"
Turning Radius, Front Bucket 4,800 mm  15' 9"
Stabilizer Overall Width 3,491 mm  11' 5"
Service Refill Capacities  
Fuel Tank Capacity 140.0 L  37.0 gal
DEF Tank Capacity 10.0 L  2.6 gal
Hydraulic Oil Capacity 120.0 L  31.7 gal
Engine Oil Capacity 8.5 L  2.2 gal
Cooling System Capacity 20.0 L  5.3 gal
Gear Box Oil Capacity 18.0 L  4.8 gal
Working Range  
Maximum Digging Height 5,370 mm  17' 7"
Maximum Reach from Center of Swing Pivot 5,671 mm  18' 7"
Maximum Digging Depth 4,332 mm  14' 3"
Maximum Height to Bucket Hinge Pin 3,478 mm  11' 5"
Dump Clearance 2,700 mm  8' 10"
Reach at Dump Position 730 mm  2' 5"
Maximum Digging Depth with Bucket Leveled 88 mm  3"
Bucket Rollback Angle @ Ground Level 40º
Bucket Rollback Angle @ Full Height 51º
Loader Dump Angle @ Full Height 44º
Maximum Operating Height 4,293 mm  14' 1"
Digging Performance  
Bucket Breakout Force—Excavator 55 kN  12,354 lbf
Bucket Breakout Force—Loader 50 kN  11,240 lbf

In the interest of continual equipment development, SANY America, Inc. reserves the right to change these specifications at any time without prior notification.

OUR LOCATIONS

Get A Quote