Landmark Equipment, Texas


  • Locations
Dallas-Irving
1351 S. Loop 12
Irving, TX 75060

Directions
McKinney
3774 N. Central Expy
McKinney, TX 75071

Directions
Fort Worth
1309 Haltom Road
Fort Worth, TX 76117

Directions
Waxahachie
2200 W. Hwy 287 Business
Waxahachie, TX 75167

Directions
Cleburne, TX
2449 Weatherford Hwy
Cleburne, TX 76033

Directions

New Holland L223 / NOT AVAILABLE

New Equipment / New Holland Ag / Light Construction Equipment / Skid Steer Loaders / L223

New Holland L223 for sale at Landmark Equipment, Texas

Double tap to zoom

New Holland L223 for sale at Landmark Equipment, Texas

 

Features

L213, L215 and C227 with their radial-lift boom geometry are ideal for digging and pushing. Productivity is boosted by their
outstanding breakout force and the geometry of the arm, which ties it directly into the chassis ensuring more pushing power.
Radial models are also suitable for applications where maximum reach is needed at medium height; for example at 719 mm height
the reach is 1.109 mm!

Specifications

Model L223
Dimensions  
Overall operating height  
with foundry/excavating bucket short lip, in (mm) 159.7 (4056)
with low profile/standard lip bucket, in (mm) 163.7 (4159)
with low profile extended/long lip bucket, in (mm) 168.8 (4287)
Height to  
Bucket hinge pin, in (mm) 129.4 (3287)
Top of ROPS, in (mm) 78.8 (2002)
Bottom of level bucket, fully raised, in (mm) 122.6 (3115)
Overall length  
without attachment with coupler, in (mm) 117.8 (2993)
with foundry excavation bucket on ground, in (mm) 142.9 (3631)
with low profile bucket, in (mm) 147 (3734)
with low profile extended bucket, in (mm) 152.1 (3863)
Dump  
Dump angle, degrees 55
Dump height  
with foundry/excavating bucket short lip, in (mm). 102.9 (2615)
with low profile/standard lip bucket, in (mm). 100 (2541)
Dump reach (max height), in (mm) 32.3 (821)
Maximum attachment rollback  
Bucket on ground, degrees 34
Bucket at full height, degrees 85
Wheelbase and Clearance  
Wheelbase, in (mm) 52 (1322)
Ground clearance (bottom of belly pan), in (mm) 8 (203)
Angle of departure, degrees 24
Clearance circle  
without bucket, in (mm) 56.2 (1428)
with 60” inch foundry bucket in carry position, in (mm) NA
with 60” inch low profile bucket on ground, in (mm) NA
with 60” inch extended low profile on ground, in (mm) NA
with foundry bucket in carry position, in (mm) 80.3 (2039) with 72” bucket
with low profile bucket on ground, in (mm) 87 (2210) with 72” bucket
with extended low profile on ground, in (mm) 91.5 (2323) with 72” bucket
Clearance circle rear, in (mm) 70.4 (1789)
Rear axle to bumper, in (mm) 40.7 (1034)
Tread width, in (mm) 56.9 (1448) with 12” x 16.5” tires
Overall width, in (mm) 69.6 (1768)
Engine  
Manufacturer/model FPT / F5H FL463
Type Diesel 4-stroke, Turbo, D.I.
Cylinder 4
Bore/stroke, in (mm) 3.9 x 4.1 (99 x 110)
Displacement, in³ (L) 195 (3.2)
Fuel injection HPCR Direct
Fuel #2 diesel
Fuel filter Pre-filter spin on @ 30 microns - Main-filter spin on @ 4 microns
Air intake Turbocharged with external CEGR
Cooling Liquid
Engine speeds  
High idle - no load, rpm 2500 +/- 25
Rated - full load, rpm 2500
Low idle, rpm 1150 +/- 25
Horsepower per SAE J1349  
Gross hp (kW) 74 (55) @ 2500 rpm
Net hp (kW) 68 (51) @ 2500 rpm
Peak torque, lb-ft (N•m) 232 (314) @1400 rpm
Power Train  
Drive pump mechanical  
Pump to engine ratio 1:01
Displacement, in³ (cc) 46 (2.81)
Flow, gpm (Lpm) NA
Flow at rated engine rpm @100% eff., gpm (Lpm) 29.4 (111)
Charge pressure, psi (bar) 360 (24.5 )
System relief, psi (bar) 5220 (360)
Control Mechanical servo
Drive pump electro hydraulic  
Pump to engine ratio. 1:01
Displacement, in³ (cc). 2.75 (45)
Flow, gpm (Lpm). 28.8 (109)
Charge pressure, psi (bar). 362 (25)
System relief, psi (bar). 5220 (360)
Control. Electro hydraulic
Drive motors  
Max displacement, in³ (cc) 28.7 (470)
Speed @ high idle engine rpm 237
Speed @ optional high speed, rpm 355
Torque @ max displ. and relief pressure, ft-lbs (N•m) 1987 (2694)
Travel speed with spec tires  
Low range, mph (km/h) 7.0 (11.3)
High range (optional), mph (km/h) 10.5 (16.9)
Final drive Single-reduction chain drive
Drive chain  
Size ASA #100
Axles  
Diameter, in (mm) 2.44 (62)
Length, in (mm) 15.6 (396)
Parking brake  
Type. Spring applied, hydraulic release disc
Engagement Depress on/off brake button on instrument panel, disconnect lapbelt, get off seat, or stop engine
Hydraulic System  
Pumps  
Type.. Gear
Displacement standard aux., in³ (cc) 2.23 (36.6)
Displacement high flow aux., in³ (cc) 1.24 (20.4)
Pump flow, gpm (Lpm) 24.2 (91.5)
Optional high flow, gpm (Lpm) 37.6 (142.5)
Loader control valve  
Type… 3 spool / open center / series
Relief pressure, psi (bar) 3046 (210)
Hydraulic filter 4 microns / spin on
Cylinders  
Lift cylinder  
Bore diameter, in (mm) 2.5 (63.5)
Rod diameter, in (mm) 1.75 (44.45)
Stroke, in (mm) 33.5 (851.9)
Closed length, in (mm) 46.9 (1192)
Bucket cylinders  
Bore diameter, in (mm). 3.0 (76.2)
Rod diameter, in (mm). 1.5 (38.1)
Stroke, in (mm). 16.1 (410)
Closed length, in (mm). 24 (610)
Weights  
Operating weight, lbs (kg) 7400 (3350)
Shipping weight, lbs (kg) 7065 (3200)
Service Capacities  
Fuel tank, gal (L) 25.5 (96.5)
Engine oil with filter, qt (L) 10 (9.4)
Hydraulic system  
System capacity with filter, qt (L) 47 (44.5)
Chain tanks (per side), qt (L) 29.5 (27.9)
Rated operating load  
50% tip, lbs (kg) 2250 (1020)
Tipping load, lbs (kg) 4500 (2045)
Breakout forces  
Lift cylinder, lbs (kN) 5080 (22.6)
Bucket cylinder, lbs (kN) 8620 (38.3)
Cycle times  
Raise, sec 3.8
Lower, sec 2.4
Dump, sec 2.6
Roll back, sec 2

OUR LOCATIONS

Get A Quote