ENGINE
ELECTRICAL
DRIVE TRAIN
HYDRAULIC & WORKING EQUIPMENT
OPERATOR'S STATION
OPERATING PERFORMANCE | |
Loader Boom Linkage Type | Z-bar pattern |
Operating Weight (w 165 lb operator) | 11,354 lb (5,150 kg) |
Standard machine with bucket | |
Tipping Load, Straight | 9,171 lb (4,160 kg) |
Tipping Load, Full Turn | 8,100 lb (3,674 kg) |
ROC with bucket * (SAE J818) | 4,050 lb (1,837 kg) |
Bucket Breakout Force | 11,600 lb (5,262 kg) |
Lift Arm Breakout Force | 10,319 lb (4,680 kg) |
Traction Force | 9,217 lb (4,180 kg) |
Cycle Time | |
Raise - Full Load | 5.3 (Seconds) |
Lower - No Load | 3.8 (Seconds) |
Dump - Full Load | 1.7 (Seconds) |
*Operating Capacity is 50% of full turn tipping load with bucket according to SAE J818 | |
ENGINE | |
Make/Model | Deutz TD2.9L Turbo |
Tier Rating | EPA Final Tier 4 |
Cylinders/Displacement | 4/176 cu in (2.9 L) |
Horsepower | 73 hp (54 kW) |
Rated Engine Speed | 2,200 rpm |
Maximum Torque | 192 ft-lb @ 1,800 rpm (260 Nm) |
Engine Lubrication | 11.6 qt (11.0 L) |
Fuel Tank Capacity | 26.4 gal (100.0 L) |
Fuel Consumption (65% of full load) | 2.6 gal/hr (10.0 L/hr) |
Electrical System | 12 volts / 95 amps |
DRIVE TRAIN | |
Transmission Type | Hydrostatic Drive with 100% Hydraulic Inching Pedal |
Axle Type | Rigid Axles With Outboard Planetary Reduction |
Differential Lock | 100% Differential Lock in Front and Rear Axles |
Parking Brake | Spring Applied, Hydraulically Released, Multiple Wet Friction Disk |
Service Brakes | Hydrostatic and Multi Wet Friction Disk |
Steering Articulation | 40 Degrees Left / 40 Degrees Right |
Frame Oscillation | 12 Degrees Left / 12 Degrees Right |
Maximum Travel Speed | Road Gear 24.8 mph (40 km/hr) |
Low Range | 4.0 mph (6.5 km/hr) |
High Range | 12.4 mph (20 km/hr) |
HYDRAULIC SYSTEM | |
Hydraulic Reservoir Capacity | 12.0 gal (45.0 L) |
Auxiliary Hydraulic Flow | 16.4 gal/min (62.0 L/min) |
Auxiliary Hydraulic, High Flow | 26.0 gal/min (98.0 L/min) |
Auxiliary Hydraulic Pressure | 3,335 psi (23.0 MPa) |
DIMENSIONS | |
Wheelbase | 6 ft 6.7 in (2,000 mm) |
Outside Turning Radius | 13 ft 8 in (4,164 mm) |
Max Lift Height to Bucket Pin | 10 ft 4.6 in (3,165 mm) |
Bucket Clearance Height | 9 ft 2 in (2,800 mm) |
Dump Height Fully Raised | 8 ft 1 in (2,465 mm) |
Max Dump Angle Fully Raised | 45 Degrees |
Max Bucket Rollback at Ground Level | 48 Degrees |
Reach Fully Raised | 2 ft 0 in (625 mm) |
Overall Width Without Bucket | 6 ft 1.5 in (1,870 mm) |
Overall Height | 8 ft 10 in (2,689 mm) |
Overall Length With Bucket | 17 ft 3 in (5,250 mm) |
Minimum Ground Clearance | 17.7 in (450 mm) |
Loader operating information and dimensions are based on the standard machnine configuration, 1.05 cu. yd. bucket, 15-19.5 tires, 165 lb (75 kg) operator. This information is affected by different configurations and attachments. |