Takeuchi TS60V / NOT AVAILABLE

Takeuchi TS60V for sale at Landmark Equipment, Texas

Double tap to zoom

Takeuchi TS60V for sale at Landmark Equipment, Texas

 

Features

The versatile TS60V features a vertical lift loader with a 2,000 lbs rated operating capacity.  It is small enough to get into those tight areas, light enough to transport easily, and powerful enough to your go to machine for landscaping and rental applications.

ENGINE

  • EPA Interim Tier 4 Compliant
  • Turbocharged
  • Engine Driven Fan
  • Swing Out Cooling Module
  • Dual Element Air Filter
  • Available Engine Block Heater

ELECTRICAL

  • Machine Monitoring System w/ Tachometer, Fuel and Coolant Gauges
  • 12 volt System with 65 amp Alternator
  • Halogen Work Lights: Front and Rear
  • Hour Meter
  • Back-up Alarm

DRIVE TRAIN AND FRAME

  • Mechanical Faced Axle Seals
  • Hydrostatic Drive System
  • 80 ANSI Chain
  • Offset Wheels are Reversible for Narrow or Wide Stance
  • Heavy Duty Tires
  • Available Over the Tire Tracks (OTT)
  • Available Two-Speed Travel

HYDRAULIC

  • Boom Float with Detent
  • Pilot Proportional Hydraulic Controls
  • Pressure Relieving Flat Faced Coupler Body
  • Auxiliary Hydraulic Pump Flow 17.1 gal / min (65.0 L / min)

WORKING EQUIPMENT

  • Vertical Boom Design
  • Mechanical Quick Coupler
  • Available Hydraulic Quick Coupler
  • Available 63” Smooth Lip Bucket (15.4 cu ft) (Narrow Wheel Position)
  • Available 67” Smooth Lip Bucket with Bolt-on Cutting Edge (16.2 cu ft)
  • Available Attachment Control Kit with 8 Pin Connector
  • Available Bolt-on Tooth Bar
  • Available 42” Pallet Forks 

OPERATOR'S STATION

  • Tilt-up Operator Station
  • Pilot Operated Joystick Controls
  • Rear Pivoting Seat Bar with Integrated Arm Rests
  • ROPS / FOPS Structure
  • 12 volt Power Outlet
  • Available Deluxe Suspension Seat
  • Available Pressurized Cab with Heat
  • Available Pressurized Cab with Air Conditioner and Heat
  • Available AM / FM / MP3 Radio with NOAA Weather Band

Specifications

OPERATING PERFORMANCE 
Loader Type Vertical
Operating Weight 6,986 lbs (3,169 kg)
Tipping Load 4,000 lbs (1,814 kg)
Rated Operating Capacity 2,000 lbs (907 kg)
Bucket Breakout Force 4,130 lbs (1,873 kg)
Lift Arm Breakout Force 3,675 lbs (1,667 kg)
Traction Force 8,453 lbs (3,834 kg)
ENGINE  
Make/Model Perkins / 404D-22T Turbocharged
Tier Rating EPA Interim Tier 4
Cylinder/Displacement 4 / 135 in³ (2.2 L)
Horsepower 60 hp (44.7 kW)
Rated Engine Speed 2,800 rpm
Maximum Torque 140 ft-lb (190 Nm)
Engine Lubrication 11.2 qt (10.6 L)
Cooling System 14.0 qt (13.2 L)
Fuel Tank Capacity 25.0 gal (95.0 L)
Electrical System 12 volts / 65 amps
DRIVE TRAIN  
Traction Drive Type Hydrostatic
Chain Case Bow Tie Drive System
Chain Size 80 ANSI
Wheel Size 10 x 16.5
Width Over Tires 66.5 in (1,689 mm)
Maximum Travel Speed  
     Single 8.2 mph (13.2 km / h)
     Optional Two Speed  11.7 mph (18.8 km / h)
HYDRAULIC SYSTEM  
Hydraulic Reservoir Capacity 8.0 gal (30.2 L)
Auxiliary Hydraulic Flow 17.1 gal/min (65 L / min)
System Operating Pressure 3,335 psi (22.9 MPa)
DIMENSIONS  
Maximum Lift Height to Bucket Pin 9 ft 8 in (2,997 mm)
Dump Height Fully Raised 7 ft 2.3 in (2,207 mm)
Dump Reach Fully Raised 2 ft 5 in (762 mm)
Maximum Bucket Rollback at Ground 26.7°
Maximum Dump Angle Fully Raised 48.3°
Transport Length 11 ft 4.4 in (3,465 mm)
Machine Length 8 ft 11.2 in (2,723 mm)
Wheel Base 3 ft 4.6 in (1,031 mm)
Angle of Departure 28°
Ground Clearance 10.5 in (267 mm)
Overall Width - Wide Position 5 ft 6.5 in (1,689 mm)
Overall Width - Wheel Reversed 5 ft 0 in (1,524mm)
Overall Height 6 ft 5 in (1,956 mm)