Specifications: TT60A available from Landmark Eq, Texas
| Model | TT60A |
| Approximate Shipping Weight | |
|
ROPS - 2WD, lbs (kg) |
4,540 (2059) |
|
ROPS - FWD, lbs (kg) |
4,840 (2195) |
| Electrical | |
|
Alternator |
12 Volt, 45 Amp |
|
Battery capacity (cold cranking amps) |
800 |
|
Lighting |
2 hi/lo beam halogen headlights, flashing safety lights / turn signals |
|
Accessory power outlets |
Standard equipment, 7-pin implement outlet |
|
Fuses |
Automotive blade type |
| Engine | |
|
Type |
4-cycle, diesel |
|
Number of cylinders / Aspiration |
3 / natural |
|
Displacement, cu. in. (L) |
179 (2.9) |
|
Gross engine power, HP (kW) |
56 (41.7) |
|
PTO horsepower, HP (kW) |
47 (35) |
|
Rated speed (RPM) |
2,500 |
|
Fuel type |
Standard diesel fuels or B20 Biodiesel (meeting ASTM 6751 standards) |
|
Air filter |
Dual element, dry type with cleanable outer element and replaceable inner safety element |
|
Lubrication |
Full flow, pressure lubrication with vertical mount spin-on filter cartridge |
|
Emissionization standard |
Tier II |
|
Fuel tank capacity, gal (L) |
16.4 (62) |
| Front Axle | |
|
2WD |
|
|
Maximum turn angle |
52 degrees |
|
FWD |
|
|
Maximum turn angle |
55 degrees |
|
Front differential lock |
Limited slip |
|
FWD clutch engagement |
Mechanical lever |
| General | |
|
ROPS** |
Foldable |
| Hydraulics | |
|
System type |
Open center, fixed displacement gear pump |
|
Implement pump capacity, gpm (lpm) |
10.8 (40.5) |
|
Steering & services system, gpm (lpm) |
Hydrostatic power steering w/dedicated gear pump 8.5 (32) |
|
Total maximum tractor flow, gpm (lpm) |
19.3 (72.5) |
|
Remote valves |
Optional, up to 2 open center, rear mounted, color coded lever controls with quick coupler dust covers |
|
Loader control valve – optional |
2 Open center, joystick controlled valves |
|
Rear 3-Point Hitch |
Standard |
|
Category |
II, convertible to I |
|
Position control, Draft sensing |
One lever, Optional mechanical draft control |
|
OECD lift capacity @ ball ends, lbs (kg) |
2,930 (1332) |
|
Rear PTO |
Standard 540-RPM, w/ flip-up PTO shaft guard |
|
Engagement |
One lever, mechanical engagement |
| Transmission | |
|
Base on standard tractor |
8Fx2R with 4 (2 synchronized) gears and 2 constant mesh ranges |
|
Traction clutch |
Dry, 11-inch (279.4 mm) diameter organic plate |
|
Ground speed* |
Forward - 1.9 to 19.0 MPH (3 to 30.5 kph); Reverse - 2.6 to 9.5 MPH (4.1 to 15.3 kph) |
|
Rear differential lock |
Mechanical foot pedal engagement |
|
Service brakes |
Individual mechanically actuated wet disc |
|
Parking brake |
Engage hand-lever, press brake pedals to lock service brakes |