Specifications: L215 available from Landmark Eq, Texas

 
Dimensions L213 L215
overall operating height    
A. with foundry/excavating bucket short lip, in (mm) 141.4 (3591) 141.4 (3591)
A. with low profile/standard lip bucket, in (mm) 146.9 (3732) 146.9 (3732)
A. with low profile extended/long lip bucket, in (mm) 152 (3859) 152 (3859)
Height to    
B. Bucket hinge pin, in (mm) 112 (2845) 112 (2845)
C. Top of ROPS, in (mm) 75.5 (1919) 75.5 (1919)
D. Bottom of level bucket, fully raised, in (mm) 105.6 (2682) 105.6 (2682)
overall length    
E. without attachment with coupler, in (mm) 95.9 (2435) 95.9 (2435)
F. with foundry excavation bucket on ground, in (mm) 119.2 (3028) 119.2 (3028)
F. with low profile bucket, in (mm) 125 (3175) 125 (3175)
F. with low profile extended bucket, in (mm) 129.8 (3297) 129.8 (3297)
Dump    
G. Dump angle, degrees 40 40
H. Dump height    
with foundry/excavating bucket short lip, in (mm) 88.4 (2246) 88.4 (2246)
with low profile/standard lip bucket, in (mm) 84.8 (2154) 84.8 (2154)
J. Dump reach (max height), in (mm) 18.5 (469) 18.5 (469)
maximum attachment rollback    
K. Bucket on ground, degrees 26 26
L. Bucket at full height, degrees Wheelbase and Clearance 95 95
P. Ground clearance (bottom of belly pan), in (mm) M. Wheelbase, in (mm) 7 (178) 37 (941) 7 (178) 37 (941)
Q. Angle of departure, degrees 22 22
Clearance circle    
R. without bucket, in (mm) 48.7 (1237) 48.7 (1237)
S. with 60” inch foundry bucket in carry position, in (mm) 75.6 (1920) 75.6 (1920)
S. with 60” inch low profile bucket on ground, in (mm) 78.5 (1994) 78.5 (1994)
S. with 60” inch extended low profile on ground, in (mm) 83.1 (2112) 83.1 (2112)
T. Clearance circle rear, in (mm) 56.4 (1433) 56.4 (1433)
U. Rear axle to bumper, in (mm) 33.8 (858) 33.8 (858)
V. Tread width, in (mm) 49.2 (1248) w/10” x 16.5” tires 49.2 (1248) w/10” x 16.5” tires
W. Overall width, in (mm) 59.8 (1518) 59.8 (1518)